Inputs not responding to signal via Adat

For general questions or discussion of Auria.

Moderators: Corey W, Rim

Post Reply
jsol
Expert
Posts: 110
Joined: Sat Jul 20, 2013 9:28 pm

Inputs not responding to signal via Adat

Post by jsol » Wed Jun 06, 2018 2:06 am

Hi, I’m using a zen studio. I’m trying to sync externally with an apogee converter via adat with external preamp bypassing the zen converters however, ,everything is set properly, source adat same sample rate and still no input activity in Auria input matrix. If I go line in through zen using the analog input it works but adat doesn’t. I’ve tried everything. The zens adat activity shows on the mixing software on the desktop but Auria matrix doesn’t work. I’ve explored the different channels the adat could be in on the matrix but no meters illuminated.

Thanks.

jsol
Expert
Posts: 110
Joined: Sat Jul 20, 2013 9:28 pm

Re: Inputs not responding to signal via Adat

Post by jsol » Fri Jun 08, 2018 8:45 pm

I figured it out. You have to assign the routing matrix from antelope to route from adat to usb record.

Cool.

Post Reply

Who is online

Users browsing this forum: No registered users and 12 guests